In the previous post Note: Remote Desktop (Unfinished), my plan was Wi-Fi plug + Windows Remote Desktop + V2Ray reverse proxy.
But thinking about it more carefully, V2Ray has to be running after boot and login, while the process of finding and logging into the host already seems to need that same V2Ray service. That feels contradictory (not sure if it really is; I haven’t tried).
If that’s true, then the NAT traversal part has to be handled by the router.
The plan becomes router NAT traversal + Wake-on-LAN + Windows Remote Desktop.
I’m still in the preparation stage and haven’t started doing it yet.
Below are the references I found:
[k2p] [2019-05-01]K2P 潘多拉9.5.1 for K2P 正式版发布！Fullcone 和稳定强大的无线
【面向小白的重制版】OpenWrt CI 在线集成编译环境使用教程
[k2p] [2018-03-06] K2P openwrt chaos_calmer V1.7 正式版发布
斐讯K1、K2、K2P 刷机、刷入Breed 辅助工具
上一条的图文版
网件R7800 OpenWrt使用V2Ray+mKcp+透明代理完美翻墙
IP地址，子网掩码，默认网关，DNS服务器详解 - wangtao169447 - 博客园
The more I read, the harder it looks. It’s beyond my current skill level.
I’ll put it aside for now.
Comments